A-Level Thermal Physics: Temperature, Internal Energy, Specific Heat Capacity and Gas Laws
A-Level PhysicsThermal PhysicsSpecific Heat CapacitySpecific Latent HeatGas LawsPhysics Exam Practice

A-Level Thermal Physics: Temperature, Internal Energy, Specific Heat Capacity and Gas Laws

PPhysics Plus Editorial Team
2026-11-17
7 min read

A practical A-Level thermal physics guide to internal energy, specific heat capacity, latent heat, gas laws, p–V diagrams and revision checkpoints.

A-Level thermal physics questions become more manageable when you separate temperature, internal energy and energy transfer, then apply the correct model and units. This guide covers the core ideas, equations, gas laws, pressure–volume diagrams and a repeatable revision routine for AQA, Edexcel and OCR students. Check your own specification and equation sheet because notation, required detail and available equations can vary between courses.

Overview

Thermal physics describes how energy is stored and transferred in matter. The most important distinction is between temperature and internal energy.

Temperature indicates the average kinetic energy of the particles in a substance. Internal energy is the total microscopic energy of the substance: the sum of the particles’ random kinetic energy and their microscopic potential energy. Consequently, a large object can have more internal energy than a small object at the same temperature, because it contains more particles. During a change of state, temperature can remain constant while internal energy increases because energy changes the arrangement or separation of particles.

In calculation questions, start by identifying the process:

  • Temperature changes without a change of state: use ΔE = mcΔθ.
  • A change of state occurs at constant temperature: use ΔE = ml.
  • A gas changes pressure, volume or temperature: choose the appropriate gas relationship and use kelvin for absolute temperature.
  • A question gives a process on a pressure–volume diagram: interpret the area under the graph as work done by the gas, subject to the sign convention being used.

Use ΔE for an energy change, m for mass, c for specific heat capacity, l for specific latent heat and Δθ for temperature change. Some specifications use different symbols, so follow the notation used by your course.

What to track

Core equations and units

Quantity or relationshipEquationUnits to check
Heating without a change of stateΔE = mcΔθEnergy J, mass kg, c J kg⁻¹ K⁻¹, temperature change K or °C
Specific latent heatΔE = mlEnergy J, mass kg, l J kg⁻¹
Ideal-gas relationshippV = nRTp Pa, V m³, n mol, R J mol⁻¹ K⁻¹, T K
Fixed amount of gaspV/T = constantUse consistent SI units and T in K
Work done at constant pressureW = pΔVWork J, pressure Pa, volume m³

The equation sheet supplied in an examination is the final authority for an assessed paper. During revision, however, practise writing the relationship, substituting values with units and checking whether the answer is physically sensible.

Specific heat capacity

Specific heat capacity is the energy required to raise the temperature of 1 kg of a substance by 1 K, assuming the relevant conditions remain the same. A high value means that more energy is needed for the same mass and temperature increase.

Worked method: A 0.50 kg sample has a specific heat capacity of 900 J kg⁻¹ K⁻¹ and is heated by 20 K. The energy change is:

ΔE = mcΔθ = 0.50 × 900 × 20 = 9.0 × 10³ J.

In a practical context, the electrical energy supplied may be greater than the calculated energy absorbed by the sample. Heat may be transferred to the surroundings or apparatus, and the heater or thermometer may introduce measurement limitations. Do not automatically describe this as a mistake: explain the energy pathways and how they affect the result.

Specific latent heat

Specific latent heat is the energy required to change the state of 1 kg of a substance without changing its temperature. The two common cases are specific latent heat of fusion and specific latent heat of vaporisation. During melting or boiling, energy is used to alter particle separation and interactions rather than increase average kinetic energy.

For example, if 0.20 kg of a material requires 6.8 × 10⁴ J to change state, its specific latent heat is:

l = ΔE/m = (6.8 × 10⁴)/0.20 = 3.4 × 10⁵ J kg⁻¹.

Gas laws and absolute temperature

For an ideal gas, pressure, volume, amount of gas and absolute temperature are linked by pV = nRT. In many A-Level questions the amount of gas is fixed, giving pV/T = constant. Always convert temperature using:

T in kelvin = temperature in °C + 273.15.

For example, a gas at 100 kPa and 20°C is heated to 80°C while its volume remains constant. Since p/T is constant, the pressure ratio is:

p₂/p₁ = T₂/T₁ = 353.15/293.15, so p₂ is approximately 1.20 × 10² kPa. The pressure rises because the particles have greater average kinetic energy and collide with the container walls more frequently and energetically.

Pressure–volume diagrams

On a p–V diagram, the area under a path represents the work done by the gas: W = ∫p dV. For constant pressure, this becomes pΔV. Expansion usually means the gas does work on its surroundings; compression means work is done on the gas. Read the direction of the process and use the sign convention specified in the question or mark scheme.

Common misconceptions to monitor

MisconceptionMore accurate interpretation
Temperature is the same as total thermal energy.Temperature relates to average particle kinetic energy; internal energy is the total microscopic energy.
A substance always gets hotter when it absorbs energy.During a change of state, energy can increase internal energy while temperature stays constant.
Degrees Celsius can be used in every gas equation.Gas-law calculations involving absolute temperature require kelvin.
Pressure is simply the force of one particle.Pressure results from many particle collisions transferring momentum to the container walls.
All supplied electrical energy heats the sample.Some energy can be transferred to the surroundings, leads, heater and apparatus.

Cadence and checkpoints

Use a rotating thermal-physics review rather than rereading the entire topic each time. A short weekly check can focus on one subtopic:

  1. Week one: concepts. Explain temperature, internal energy and changes of state without equations. Draw a heating curve and label where temperature is constant.
  2. Week two: energy calculations. Complete mixed questions using mcΔθ and ml. Record every unit conversion and rearrangement that caused difficulty.
  3. Week three: gases. Practise pV = nRT and fixed-mass gas relationships. Include questions requiring kelvin conversion and interpretation of particle motion.
  4. Week four: diagrams and explanations. Interpret p–V paths, work done and energy transfers. Attempt at least one extended-response question under timed conditions.

At the end of each session, record three items: the subtopic attempted, the type of error made and the next action. Useful error labels include concept, equation selection, units, algebra, graph interpretation and communication. Reattempt missed questions after a delay without looking at the solution.

Before a mock or final examination, complete a mixed set without notes. Include at least one calculation, one explanation of a heating curve, one gas-law problem and one practical or evaluation question. Use mark schemes to identify missing reasoning, not just incorrect final answers. The guide on using physics past paper mark schemes and building an error log can support this process.

How to interpret changes

When an answer changes between attempts, look for the cause rather than simply marking it right or wrong. A large improvement in calculation accuracy may show that unit checks are working, while persistent errors in explanation questions may indicate a particle-model gap.

Use these diagnostic questions:

  • Did I identify what is changing: temperature, state, pressure, volume or internal energy?
  • Did I choose an equation that matches the physical process?
  • Are mass in kilograms, volume in cubic metres, pressure in pascals and temperature in kelvin where required?
  • Have I distinguished energy transferred to the sample from energy supplied by a heater?
  • Does the magnitude and sign of the answer make sense?

For practical questions, connect observations to limitations. A temperature-time graph may have a gradient that changes because the temperature difference from the surroundings changes. A plateau may be expected during a state change, but a poorly defined plateau can reflect heat loss, slow measurement or an impure sample. For graphing and uncertainty techniques, revisit practical data analysis, uncertainty and best-fit lines.

When to revisit

Revisit this guide monthly during normal revision, then weekly in the period before a mock or examination. Return sooner when an error log shows repeated problems with kelvin conversion, units, latent heat, p–V diagrams or explanations of internal energy. Also check the current AQA, Edexcel or OCR specification and equation materials at the start of each academic year and after any assessment or specification update; this article provides shared physics principles, not a replacement for board-specific requirements.

For a practical next step, set a 30-minute checkpoint today. Without notes, define internal energy, write the two energy equations and the ideal-gas equation, convert 25°C to kelvin, and solve one mixed question. Mark it carefully, label each error, and schedule the missed questions for your next review. Once the same subtopic is accurate on two separate attempts, rotate to the next area while keeping a short monthly check in your revision plan.

Related Topics

#A-Level Physics#Thermal Physics#Specific Heat Capacity#Specific Latent Heat#Gas Laws#Physics Exam Practice
P

Physics Plus Editorial Team

Physics Education Editors

Senior editor and content strategist. Writing about technology, design, and the future of digital media. Follow along for deep dives into the industry's moving parts.