Required Practical Physics: Student Write-Up Templates, Methods and Evaluation Checklists
required practicalsphysics practical write-upGCSE physicsA-Level physicsuncertaintiesgraphslab skills

Required Practical Physics: Student Write-Up Templates, Methods and Evaluation Checklists

PPhysics Plus Editorial Team
2026-11-01
9 min read

A reusable GCSE and A-Level required practical physics checklist covering methods, variables, graphs, uncertainty, evaluation and common mistakes.

A strong required practical physics write-up shows more than a set of results: it explains how the investigation was planned, carried out, analysed and evaluated. This reusable guide provides GCSE and A-Level checklists, practical-specific examples, uncertainty guidance and a final review routine for electricity, mechanics, waves and materials investigations.

Overview

Required practical work can appear in different forms across GCSE and A-Level courses, and the exact practical list depends on your exam board and specification. AQA, Edexcel and OCR may use different wording or assess practical skills in different contexts, so check your course materials before treating any checklist as complete. The core habits, however, are broadly transferable.

A physics practical write-up should allow another student to understand what you investigated, reproduce the method safely, inspect the raw data and judge how reliable the conclusion is. It should not simply present a polished graph or a final value. Keep original measurements, including unexpected readings, and distinguish measured quantities from calculated quantities.

At GCSE, the emphasis is usually on identifying variables, describing a sensible method, recording results, drawing suitable graphs and making a justified conclusion. At A-Level, you are generally expected to give more precise detail about control variables, uncertainties, data processing, significant figures, limitations and improvements. In both cases, use the equations and units required by your course. The GCSE Physics Equations guide and the SI units and conversions guide can help with this stage.

A reusable practical write-up template

  1. Title: State the relationship or quantity being investigated.
  2. Aim: Explain what you are trying to find out, preferably using the independent and dependent variables.
  3. Prediction or hypothesis: Describe the expected pattern and give a physics reason where appropriate.
  4. Variables: Identify the independent variable, dependent variable and important control variables.
  5. Apparatus: List equipment, including measuring instruments and their ranges or resolutions when relevant.
  6. Risk assessment: Identify hazards, possible harm and specific control measures.
  7. Method: Give numbered, reproducible steps. Include how readings are taken, repeated and recorded.
  8. Results: Present raw data in a labelled table with units in the headings.
  9. Processing: Show one sample calculation, transformations and any averages or derived quantities.
  10. Graph: Plot the correct variables, use sensible scales, add a line or curve of best fit and label axes with units.
  11. Conclusion: Answer the aim using evidence from the data and relevant physics.
  12. Evaluation: Discuss uncertainty, anomalies, limitations and realistic improvements.

Checklist by scenario

GCSE required practicals

Before submitting or revising a GCSE practical, check the following:

  • Can you clearly name the independent, dependent and control variables?
  • Does the method explain how the independent variable is changed and how the dependent variable is measured?
  • Have you included a suitable range of values and repeated readings where this would improve reliability?
  • Are units written in table headings rather than repeatedly beside every number?
  • Does the graph use the independent variable on the horizontal axis unless there is a clear reason otherwise?
  • Have you described the pattern without claiming more precision than the data supports?
  • Does your evaluation identify a specific limitation and a practical improvement?

For example, in an investigation of resistance, the independent variable might be the current or potential difference, while the dependent variable is the other electrical quantity. State how the circuit is connected, how the reading is changed and how the component is protected from excessive heating. If heating could affect resistance, explain how you would reduce or monitor that effect rather than merely writing control temperature.

A-Level required practicals

At A-Level, extend the GCSE structure with more explicit measurement and uncertainty detail:

  • State the resolution or smallest scale division of key instruments.
  • Explain whether repeated readings, range, scatter or instrument resolution is the main source of uncertainty.
  • Use appropriate uncertainty notation and avoid reporting a result to unjustified decimal places.
  • Consider absolute, percentage or fractional uncertainty where relevant to the calculation.
  • Use a graph to test a model, not just to display data. Explain what the gradient or intercept represents.
  • Comment on whether the intercept is consistent with the expected value and whether the best-fit line is justified.
  • Separate random uncertainty, which affects scatter, from systematic error, which can shift readings in one direction.

For a practical involving a relationship such as y = mx + c, define what is plotted on each axis and explain the physical meaning of the gradient and intercept. If the theory predicts a straight line through the origin but your line does not, discuss possible reasons such as a zero error, background effect or an incorrect model. Do not force a line through the origin simply because the prediction suggests one.

Electricity investigations

Use this sequence for resistance, current-voltage or component investigations:

  • Draw or include a clear circuit diagram with meters connected correctly.
  • Check that the ammeter is in series and the voltmeter is connected across the relevant component.
  • Record current in amperes and potential difference in volts, converting prefixes where needed.
  • State whether the component may heat up and how readings will be taken consistently.
  • Take enough points to reveal the shape of the relationship rather than relying on two readings.
  • Switch off the circuit between readings when appropriate to limit heating and conserve equipment.

Do not describe a component as obeying or not obeying Ohm’s law solely because a graph looks curved. Refer to the condition required for the law and explain how changing temperature or another property affects resistance.

Mechanics and motion investigations

For experiments involving force, extension, acceleration, moments or energy:

  • Define where distances are measured from and keep the reference point consistent.
  • Check that equipment is aligned and that the motion is not obstructed by friction or a snagging cord.
  • Measure a suitable range of values and repeat timing measurements where reaction time may matter.
  • Use light gates, motion sensors or video analysis consistently if available, but still record the settings and sampling approach.
  • Explain how friction, air resistance, pulley mass or apparatus movement could affect the model.
  • Use a force-extension graph carefully: identify the limit of proportionality and distinguish it from the point at which permanent deformation begins if the investigation addresses both.

Waves and materials investigations

For waves, sound, refraction or material properties, check that:

  • Distances, angles and wavelengths are measured from clearly defined positions.
  • Parallax is reduced by viewing scales at right angles or using an appropriate alignment method.
  • The environment is controlled where background sound, light or temperature could affect results.
  • For repeated wavelengths or oscillations, measure several cycles or lengths and divide by the number measured to reduce percentage uncertainty.
  • For density, resistivity or elastic behaviour, show how the derived quantity is calculated from the measured dimensions and readings.
  • Thin wires, small diameters and short lengths can create large percentage uncertainties, so explain why a longer measured length or repeated diameter measurement may help.

What to double-check

Results tables and graphs

Before analysing your data, check that every column has a quantity and unit, values are recorded consistently and calculated columns are clearly separated from raw readings. Do not delete an anomalous result without explaining what happened and deciding, with evidence, whether it should be repeated or retained.

For graphs, use a scale that occupies most of the available grid, plot points accurately and draw a best-fit line that reflects the overall pattern. A line of best fit does not need to pass through every point. If you draw uncertainty bars, make their size consistent with the stated uncertainty and use them to judge whether differences are meaningful.

Uncertainty and reliability

Ask three different questions:

  • Precision: How finely can the instrument or method distinguish values?
  • Random uncertainty: How much do repeated readings vary?
  • Systematic error: Could all readings be shifted in the same direction?

Repeating a reading can reduce the influence of random variation, but it does not remove a systematic zero error. Similarly, taking more decimal places does not make a measurement more accurate. A good evaluation links each limitation to its effect on the result and then proposes a change that addresses it.

Conclusions and improvements

A conclusion should use data. Instead of writing that the results were accurate, write that the data showed an increase, decrease or particular relationship, then quote a representative value, gradient or comparison where appropriate. If the evidence is limited, say that the results suggest a relationship rather than proving it.

Improvements should be specific. Replace use better equipment with use a light gate to measure time intervals, use a longer wire to increase the measured length, insulate the apparatus to reduce heat loss, or repeat readings across a wider range. Explain why the change would reduce uncertainty or improve control.

For longer written responses, organise the explanation in the same logical order as the experiment. The GCSE six-mark question guide is useful when a practical question asks for a connected method, explanation and evaluation rather than isolated bullet points.

Common mistakes

  • Confusing variables: The variable deliberately changed is independent; the quantity measured in response is dependent.
  • Listing apparatus without a method: Equipment names do not explain how a fair test is carried out.
  • Missing units: A numerical value without a unit is incomplete unless the quantity is dimensionless.
  • Using a bar chart for continuous data: Continuous variables normally require a scatter graph with a best-fit line or curve.
  • Calling every unusual result an anomaly: A point is not automatically invalid because it does not fit expectations.
  • Repeating without averaging: If repeats are taken, explain how they are used and investigate any large disagreement.
  • Writing vague evaluations: Random error, human error and inaccurate equipment are not enough on their own. Name the mechanism and its effect.
  • Overstating certainty: A neat graph does not guarantee an accurate result, particularly if a systematic error remains.
  • Ignoring safety: Include realistic controls, such as keeping liquids away from electrical equipment, securing suspended masses and allowing hot components to cool.
  • Following the wrong specification: Use your teacher’s practical list and current exam-board materials when preparing for assessment.

When to revisit

Return to this checklist before each practical session, immediately after collecting results and again during exam revision. Revisiting it at three stages catches different problems: planning errors before the experiment, missing raw data while the setup is still available, and weak analysis when you are practising exam questions.

Before revision season, compare your notes with the required practical section of your own GCSE or A-Level specification. Practical expectations and classroom methods can vary, so update apparatus diagrams, safety notes and terminology to match what you actually used. If your teacher provides a particular uncertainty convention or graph format, follow that instruction.

Use this final action list:

  1. Gather your practical list, class notes and specification.
  2. For each investigation, complete the title, aim, variables, apparatus, risks and method from memory.
  3. Recreate one results table and graph using sensible example data or your own measurements.
  4. Write one evidence-based conclusion and two specific improvements.
  5. Check every unit, equation, axis label and significant figure.
  6. Practise explaining why the method is valid, not just describing what was done.

Keep the completed write-ups together as practical revision notes. Alongside formula revision and past-paper practice, they provide a compact record of the decisions, measurements and evaluation points that physics exam questions often test.

Related Topics

#required practicals#physics practical write-up#GCSE physics#A-Level physics#uncertainties#graphs#lab skills
P

Physics Plus Editorial Team

Physics Education Editors

Senior editor and content strategist. Writing about technology, design, and the future of digital media. Follow along for deep dives into the industry's moving parts.