A-Level Physics Electric Fields: Field Strength, Potential, Energy and Exam Question Methods
A-Level PhysicsElectric FieldsElectrostaticsElectric PotentialExam TechniqueRevision Guide

A-Level Physics Electric Fields: Field Strength, Potential, Energy and Exam Question Methods

PPhysics Plus Editorial Team
2026-11-10
6 min read

Revise A-Level electric fields with clear equations, sign checks, field and potential links, worked methods and a reusable progress tracker.

This A-Level Physics electric fields revision guide links field strength, force, potential and energy so you can choose the right equation, handle signs and vectors confidently, and track the mistakes that recur in exam questions. It is designed for regular use alongside practice questions from your exam board.

Overview

An electric field is a region in which a charge experiences a force. Electric fields are produced by charges and are represented by field lines. The direction of an electric field at a point is the direction of the force on a small positive test charge.

Three ideas must be kept separate:

  • Electric field strength, E: force per unit charge. It is a vector quantity, so it has both magnitude and direction.
  • Electric potential, V: work done per unit positive charge in bringing the charge from infinity to a point. It is a scalar quantity.
  • Electric potential energy, U: the energy associated with a charge’s position in an electric field.

For a uniform field between parallel plates, the field is approximately constant and field lines are straight, parallel and equally spaced. Around an isolated point charge, the field is radial: its strength changes with distance and its direction is along the line joining the charge to the point being considered.

Always check the exact equation list and definitions for your specification. AQA, Edexcel and OCR may present required relationships or conventions in slightly different ways, even though the underlying physics is the same.

What to track

Core equations and units

QuantityRelationshipSI unitUseful reminder
Electric field strengthE = F/qN C−1 or V m−1Use the force on a positive test charge for direction.
Force in a fieldF = qENThe force reverses direction for a negative charge.
Point-charge fieldE = kQ/r2N C−1Distance r is measured from the centre of the charge.
Potential of a point chargeV = kQ/rVPotential is positive for positive Q and negative for negative Q.
Uniform-field potential differenceV = EdVUse the magnitude when the field and separation are aligned.
Potential energyU = qVJThe sign of q matters.
Work and potential differenceW = qΔVJState whether this is work done on the charge or by the field.

Here, k is the electrostatic constant, Q is the source charge, q is the charge being acted on, r is the distance from the source charge and d is the separation or distance moved in the field. Convert nanocoulombs, millimetres and centimetres into SI units before substituting.

Field strength, force and direction

For a point charge, doubling r makes the field strength four times smaller because E is proportional to 1/r2. In contrast, the potential is proportional to 1/r, so doubling r makes the magnitude of V twice as small. This difference is a frequent source of errors in electric field strength questions.

Draw a small arrow before calculating. Field lines point away from positive charges and towards negative charges. A positive charge experiences a force in the direction of the field; a negative charge experiences a force opposite to the field. If several charges are present, calculate or resolve each field contribution as a vector before finding the resultant.

Potential and energy

Potential is not the same as potential energy. Potential describes the field at a point, whereas potential energy depends on the charge placed there: U = qV. A negative charge in a positive potential has negative potential energy under the usual zero-at-infinity convention. Do not remove the sign simply because the question asks for an energy.

For a charge moving between two points, write the potential difference explicitly as ΔV = Vfinal − Vinitial. This makes it easier to decide whether the electric field has done positive or negative work. In a uniform field, potential decreases in the direction of the electric field.

Cadence and checkpoints

Use this topic as a tracker rather than revising it once and filing it away. A short review every week during an electric-fields unit, followed by a monthly mixed-question check, is a practical rhythm. After each session, record the question type, the mistake and the correction.

  1. First checkpoint: definitions. Without notes, define field strength, potential and potential energy. Include units and whether each quantity is scalar or vector.
  2. Second checkpoint: equation selection. Sort questions into uniform field, point-charge field, force, potential or energy. Practise choosing the equation before entering numbers.
  3. Third checkpoint: signs and vectors. Complete questions involving positive and negative charges, field direction and potential differences. Mark every direction on a diagram.
  4. Fourth checkpoint: mixed application. Attempt a timed set containing calculations, graph interpretation and written explanations. Review the method, not just the final answer.

A useful error log has four columns: question type, what went wrong, correct principle and next check. Typical entries include “used 1/r instead of 1/r2”, “treated a vector as a scalar”, “forgot to convert microcoulombs” or “used qV without considering the sign”.

How to interpret changes

Calculation workflow

  1. Underline the quantity requested and list the known values with units.
  2. Sketch the charges, distances and field direction.
  3. Choose the relationship that matches the physical situation.
  4. Convert all values to SI units and substitute with powers of ten visible.
  5. Check the unit, sign, significant figures and approximate size of the answer.

For example, if a question asks for the force on a small charge near a point charge, do not jump directly to an energy equation. First find E = kQ/r2, then use F = qE. If the charge is negative, the magnitude may be positive in the calculation, but the force direction must be stated separately or represented by a correctly directed vector.

Graph and explanation questions

For a graph of E against r around a point charge, expect an inverse-square relationship. For a graph of V against r, expect an inverse relationship. A graph of potential against distance in a uniform field has a constant gradient; the magnitude of that gradient represents the field strength when distance is measured along the field.

In explanation questions, connect cause and effect in a sequence: field strength changes, therefore force changes for a fixed charge; or potential changes, therefore the charge’s potential energy changes according to U = qV. Avoid saying that “potential is the energy” without specifying energy per unit charge.

When to revisit

Revisit this guide whenever your error log shows two similar mistakes, after completing a new set of electric-fields exam questions, and before a cumulative mock examination. A monthly review is useful even when the topic is no longer being taught because it tests whether the equations remain connected rather than memorised separately.

Return sooner if you cannot explain the difference between field strength and potential, regularly lose minus signs, confuse radial and uniform fields, or obtain answers with inconsistent units. At the next review, begin with the weakest checkpoint rather than rereading the whole topic. Then complete one unfamiliar question without notes and add the result to your tracker.

For broader exam practice, use the A-Level Physics multiple-choice strategy to practise estimation and distractor checking, and the physics past paper revision planner to log recurring errors across topics. Keep your specification’s current equation sheet beside this article and update your checklist if the wording, notation or required relationships differ.

Related Topics

#A-Level Physics#Electric Fields#Electrostatics#Electric Potential#Exam Technique#Revision Guide
P

Physics Plus Editorial Team

Physics Education Editors

Senior editor and content strategist. Writing about technology, design, and the future of digital media. Follow along for deep dives into the industry's moving parts.