This GCSE physics specification checklist helps you compare AQA, Edexcel and OCR topic structures, identify missing knowledge, check equations and practical skills, and turn the results into a focused revision queue. Always use the current specification and equation document for your exact qualification, tier and route before treating a topic as complete.
Overview
Exam boards cover much of the same GCSE physics, but they organise and label it differently. A topic called “Energy” on one specification may be split between conservation of energy, forces doing work and energy resources on another. This means a school scheme of work, revision guide or online playlist should not be used as the final checklist on its own.
First confirm four details: your exam board, specification code, whether you are studying Combined Science or separate Physics, and whether your course uses Foundation or Higher tier where applicable. Then download the latest specification and equation sheet from the relevant exam board. The checklist below is a planning map rather than a replacement for those documents.
| Area | AQA | Edexcel | OCR Gateway-style structure |
|---|---|---|---|
| Energy | Energy stores and transfers; energy resources; efficiency; power | Conservation of energy; forces doing work; energy resources and transfers | Energy within the broader matter, forces and global challenges structure |
| Electricity | Current, potential difference, resistance, circuits, domestic electricity | Electricity and circuits; static electricity | Electricity and magnetism, including circuits and electrical quantities |
| Particle model | States of matter, density, internal energy, changes of state and pressure | Particle model and forces in matter | Matter, particle explanations and relevant quantitative relationships |
| Forces and motion | Forces, motion, momentum, work, moments and pressure | Motion and forces; forces and their effects; forces and matter | Forces, motion, interactions and applications |
| Waves and radiation | Wave properties, electromagnetic waves and uses | Waves; light and the electromagnetic spectrum | Waves and radiation, including electromagnetic radiation and risks or uses |
| Atomic and nuclear physics | Atomic structure, isotopes, radiation, half-life and nuclear energy | Radioactivity and astronomy-related applications | Radiation, atomic structure and wider scientific applications |
| Magnetism | Permanent magnets, magnetic fields, motors and generators | Magnetism, motor effect and electromagnetic induction | Electricity and magnetism, including fields and electromagnetic effects |
| Space or global challenges | Space physics appears in the relevant Physics specification | Astronomy is a named area in the specification | Global challenges and practical applications form a named area in the course structure |
The comparison is useful for spotting broad gaps, but topic labels are not enough. For each row, open the specification and record the exact statements your course requires. Some content, practical activities and equation expectations depend on the qualification route, so do not assume that a separate Physics checklist applies unchanged to Combined Science.
What to track
A useful GCSE physics revision audit tracks more than whether you have read a chapter. Use four columns for every specification statement: knowledge, equations, practical skills and exam performance.
1. Knowledge and application
- Can you define the key quantities and give their SI units?
- Can you explain the model, not just recall a sentence?
- Can you apply the idea to an unfamiliar diagram, graph or situation?
- Can you identify assumptions, limits or safety issues where relevant?
For example, electricity is not complete when you can repeat the definition of current. You should also be able to interpret circuit diagrams, use relationships between charge, current and time, explain resistance, and analyse results from a circuit investigation.
2. Equations and units
Mark each relationship as recognise, rearrange, substitute or apply in context. Check that you can convert prefixes, square or cube units when necessary, and give a sensible final unit. Use the current exam-board equation sheet rather than relying on a generic GCSE physics formulas list. Keep a separate note of equations that must be recalled, equations supplied in the paper, and relationships that must be inferred from a graph or definition.
3. Required practical physics
Record the practical title or investigation, independent and dependent variables, control variables, apparatus, method, safety precautions, results table, graph choice, uncertainty or anomalies, and evaluation points. Practical questions can test planning and data analysis even when the examination does not reproduce the classroom setup. The GCSE required practicals master checklist and the methods and evaluation checklist can help organise this evidence.
4. Exam evidence
After a set of physics exam questions, log the exact reason for each lost mark: missing fact, equation choice, unit conversion, algebra, graph reading, command word, explanation or careless error. A mark scheme is most useful when it changes your next action. See the past paper and error-log guide for a repeatable method.
Printable gap-audit checklist
- □ I have confirmed my board, specification code and qualification route.
- □ I have copied the official topic statements into a revision tracker.
- □ I have checked each topic against the current equation sheet.
- □ I can answer retrieval questions without looking at notes.
- □ I have practised at least one calculation and one explanation per major area.
- □ I have reviewed the required practical method, graph and evaluation points.
- □ I have added errors from my latest paper to an error log.
Cadence and checkpoints
Use the checklist at different levels rather than trying to rewrite the whole plan every day.
- At the start of a half-term: compare the class scheme of work with the official specification. Flag statements that have not yet been taught or assessed.
- Each week: choose one knowledge gap, one equation skill and one practical or data skill. Finish with a small set of exam questions.
- After each mock or topic test: update confidence using evidence, not memory. A simple scale is 0 for unfamiliar, 1 for recalled with help, 2 for mostly secure and 3 for secure under timed conditions.
- Every four to six weeks: repeat a short mixed retrieval quiz. This checks whether an apparently fixed topic still works when it is separated from the lesson context.
- Before an exam series: complete a full specification sweep, then prioritise recurring errors and high-value practical skills rather than rereading every page.
Teachers and tutors can use the same tracker at class level by recording the percentage of students who are secure with a statement, the most common misconception and the next retrieval activity. The aim is not to create a ranking; it is to make the next teaching or revision decision visible.
How to interpret changes
A changing score does not always mean that understanding has improved or declined. Separate the causes.
- Knowledge gap: you cannot explain the idea without notes. Return to the model, then use closed-book retrieval.
- Application gap: you know the definition but cannot select a method in an unfamiliar question. Practise worked examples with the context removed and changed.
- Mathematical gap: the physics is clear but rearranging, standard form or unit conversion fails. Do short, focused calculation sets.
- Practical gap: you can describe the result but not variables, controls, uncertainty or evaluation. Rebuild the investigation as a method-and-data flowchart.
- Exam-technique gap: your answer contains relevant ideas but misses the command word or required detail. Annotate the mark scheme and rewrite one response.
Give priority to gaps that appear in more than one setting: a retrieval quiz, a practical question and a past paper. A single unusual mistake may need logging but does not necessarily justify rebuilding an entire topic. For broader diagnostic practice, use the GCSE misconceptions diagnostic.
When to revisit
Revisit this article whenever your course moves to a new topic, after every mock or substantial past-paper session, and at least once each half-term during the school year. A quarterly specification check is sensible for teachers and tutors, while students should check sooner if their school changes exam board, qualification route or teaching sequence.
Before the summer exam series, verify the official specification, equation sheet, assessment guidance and practical requirements again. Exam boards can amend documents or clarify terminology, and the same topic may be arranged differently in a new specification. Do not silently carry an old checklist forward.
Turn the audit into your next revision session
- Circle three statements scored 0 or 1.
- Choose one from knowledge, one from calculation and one from practical or exam application.
- Write a measurable task for each, such as “complete five density calculations with units” rather than “revise particles”.
- Finish with two closed-book questions and record the remaining error.
- Schedule a short mixed retrieval check for the following week.
Keep the tracker beside your physics notes, equation practice and error log. Updating it after real evidence turns a broad GCSE physics revision plan into a living map of what is secure, what is fragile and what deserves attention next.