Use this GCSE physics equations guide as a working formula sheet: it explains which equation fits common scenarios, gives the units and symbols to use, shows how to rearrange formulas, and provides a repeatable checklist for exam practice. Equation lists can differ between AQA, Edexcel and OCR specifications, so always compare this reference with your own specification and any equation sheet supplied for your exam.
Overview
Knowing a formula is only the first step. In an exam, you must identify the physical quantities in the question, convert them into suitable units, choose an equation, substitute carefully and give an answer with a sensible unit. A reliable routine is:
- Underline the known values and write down what the question asks for.
- Translate words into symbols. For example, distance becomes s, time becomes t and speed becomes v.
- Check units before substituting. Convert centimetres to metres, grams to kilograms and minutes to seconds where necessary.
- Write the equation first. This makes your method visible and reduces substitution errors.
- Rearrange before inserting numbers if the required quantity is not already the subject.
- Check the result. Ask whether the size, sign and unit are physically reasonable.
The formula sheet is not a replacement for understanding. For example, weight is a force caused by a gravitational field, whereas mass is the amount of matter in an object. Their units and equations are different.
Checklist by scenario
Motion and forces
Use these equations when a question describes movement, acceleration or interactions:
- Speed: speed = distance ÷ time, or v = s/t. Speed is measured in metres per second (m/s), distance in metres (m), and time in seconds (s).
- Acceleration: acceleration = change in velocity ÷ time, or a = (v - u)/t. Here, u is initial velocity and v is final velocity; acceleration is measured in m/s².
- Resultant force: force = mass × acceleration, or F = ma. Force is measured in newtons (N), mass in kilograms (kg), and acceleration in m/s².
- Weight: weight = mass × gravitational field strength, or W = mg. Weight is measured in N, mass in kg, and g in N/kg. Use the value of g given in the question or on the relevant exam material.
- Momentum: momentum = mass × velocity, or p = mv. Momentum is measured in kg m/s.
- Stopping distance: stopping distance = thinking distance + braking distance. This is a relationship to remember and apply rather than a calculation formula with fixed values.
When a question involves a journey or a velocity-time graph, distinguish distance from displacement and speed from velocity if the wording requires it. For a graph, the gradient and area may represent different quantities, so read the axes before choosing an equation.
Energy, work and power
- Kinetic energy: Ek = 1/2mv². Use kilograms and metres per second.
- Gravitational potential energy: Ep = mgh. Height must be measured in metres.
- Elastic potential energy: Ee = 1/2ke², where k is spring constant in N/m and e is extension in metres.
- Work done: work done = force × distance moved in the direction of the force, or W = Fs. Work done and energy are measured in joules (J).
- Power: power = energy transferred ÷ time, or P = E/t. Power is measured in watts (W).
- Efficiency: efficiency = useful output ÷ total input. Multiply by 100 to express it as a percentage.
Power describes how quickly energy is transferred; it does not mean that more energy has necessarily been transferred overall. A low-power device can transfer the same energy as a high-power device if it operates for longer.
Electricity
- Charge: charge = current × time, or Q = It. Charge is measured in coulombs (C), current in amperes (A), and time in seconds.
- Potential difference: potential difference = current × resistance, or V = IR. Voltage is measured in volts (V) and resistance in ohms (Ω).
- Electrical power: power = potential difference × current, or P = VI.
- Electrical energy: energy transferred = potential difference × charge, or E = VQ. You may also use E = Pt when power and time are known.
Before calculating, identify whether a value is current, charge, voltage, resistance, power or energy. The symbols can look deceptively similar: Q is charge, while I is current. In circuit questions, use the information about series and parallel components as well as the equation.
Waves and radiation
- Wave speed: wave speed = frequency × wavelength, or v = fλ. Frequency is measured in hertz (Hz), wavelength in metres, and wave speed in m/s.
- Magnification: magnification = image height ÷ object height. Use the same length unit for both heights so the result has no unit.
- Half-life: half-life is the time taken for the number of unstable nuclei, or the activity, to fall to half its original value. Count successive halvings carefully rather than subtracting a fixed amount of activity.
For waves, convert kilohertz or megahertz into hertz when needed. For example, 1 kHz is 1,000 Hz and 1 MHz is 1,000,000 Hz. Use the wavelength measured from one point on a wave to the equivalent point on the next cycle, such as crest to crest.
Density, pressure and space
- Density: density = mass ÷ volume, or ρ = m/V. Density is measured in kg/m³ when mass is in kg and volume is in m³.
- Pressure: pressure = force ÷ area, or p = F/A. Pressure is measured in pascals (Pa), equivalent to N/m².
- Pressure in a fluid: pressure difference = height × density × gravitational field strength, often written Δp = hρg where this relationship is included in your specification.
- Red-shift and space calculations: use the exact relationship stated in the question or on your exam equation sheet. Do not assume that an equation from A-Level physics is required in a GCSE calculation.
Volume conversions cause frequent errors. One cubic metre is much larger than one cubic centimetre, so do not convert a volume by multiplying or dividing by 100 only. Write the unit conversion separately before calculating.
How to rearrange GCSE physics equations
Use inverse operations in the opposite order to isolate the unknown. For V = IR:
- To find current, divide both sides by R: I = V/R.
- To find resistance, divide both sides by I: R = V/I.
For ρ = m/V:
- To find mass, multiply by volume: m = ρV.
- To find volume, divide mass by density: V = m/ρ.
For v = fλ:
- To find frequency, divide wave speed by wavelength: f = v/λ.
- To find wavelength, divide wave speed by frequency: λ = v/f.
For a formula containing a square, such as Ek = 1/2mv², multiply by 2, divide by m, and then take the square root when finding velocity. Write each step rather than attempting to do it mentally. A formula triangle can help with simple relationships, but it is less useful for equations containing powers, fractions or several operations.
What to double-check
| Common confusion | What to check |
|---|---|
| Mass versus weight | Mass is measured in kg; weight is a force measured in N. Use W = mg for weight. |
| Power versus energy | Energy is the amount transferred in J; power is the rate of transfer in W. Use P = E/t. |
| Current versus charge | Current is the rate of flow in A; charge is the amount transferred in C. Use Q = It. |
| Speed versus acceleration | Speed describes motion; acceleration describes a change in velocity. Their units are m/s and m/s². |
| Frequency versus wavelength | Frequency counts cycles per second; wavelength is a distance. Use v = fλ. |
| Weight versus gravitational field strength | Weight is measured in N; gravitational field strength is measured in N/kg. They are not interchangeable. |
Also check prefixes: kilo means 1,000, mega means 1,000,000, milli means one thousandth, micro means one millionth, and nano means one billionth. Write the value in standard form if that makes the conversion clearer.
Exam-board equation sheets and symbol conventions can change between specifications. For AQA, Edexcel or OCR GCSE physics revision, use the official specification and examination materials for your course alongside this guide. For practical work, keep equations connected to measurements, uncertainties and evaluation; the GCSE required practicals checklist can help organise that work.
Common mistakes
- Substituting numbers before rearranging, then losing track of which quantity is being found.
- Using grams, centimetres or minutes in an equation that expects kilograms, metres or seconds.
- Forgetting to square velocity in kinetic energy or extension in elastic potential energy.
- Reporting a percentage efficiency as a decimal when the question asks for a percentage, or vice versa.
- Leaving out a unit, using the wrong unit, or giving a result with more significant figures than the data supports.
- Choosing an equation because it contains a familiar number rather than because its quantities match the scenario.
- Ignoring a negative sign or treating a direction-sensitive velocity as an ordinary speed.
- Memorising an equation without practising what each symbol means.
After every calculation, perform a quick estimate. If a force of a few newtons acts on a mass of a few kilograms, an acceleration of millions of metres per second squared should prompt a unit check. In a written answer, show the equation, substitution and final unit so method marks are easier to award.
When to revisit
Return to this guide at the start of each physics topic, before mock examinations and during the final weeks before summer exams. Check your exam board's current specification and equation materials whenever your teacher announces a specification change or gives you a new course booklet. This is particularly important if you move school, change exam board or use revision resources written for a different specification.
Use this 15-minute weekly routine:
- Choose five unfamiliar physics exam questions from different topics.
- Hide the formula list and identify the required equation from the wording and units.
- Write the equation, rearrange it if necessary, convert units and calculate.
- Record the exact error: equation choice, unit conversion, rearrangement, arithmetic or interpretation.
- Redo missed questions after a short interval, then repeat them before your next mock or past paper.
For a longer study plan, combine equation retrieval with timed questions and an error log using the physics past paper revision planner. The goal is not to recite every formula in order; it is to recognise the physical situation, select the relationship, use consistent units and communicate a checkable solution.